CLICK HERE
TO VIEW
OUR FULL RANGE

ISO 9001 Registered Firm

Insulated Roller Garage Doors

Insulated Roller Door Details (77mm slat)

outside insulated roller garage door

The door curtain is constructed from 77mm foam-filled aluminium slats which are approximately 15mm thick. All doors come with full automation as standard and are made-to-measure at no extra cost.

aluroll insulated roller garage door

Insulated roller door with an externally-mounted box-housing.

motorbar box and track for garage doors

The size and cost of the Insulated Roller Door is calculated by the overall curtain width which includes the 90mm guides on each side and the overall height (including the 300mm roller box above).

inside insulated roller garage door

View showing the rear of the door. Note the neat full box-housing which is a standard feature on all Aluroll doors.

reinforced section for insulated garage door

Triple brush/rubber Draught Seals in the powder-coated guides result in very quiet operation and a draught free garage. The heavy-duty double Base Seal prevents debris and draught blowing under the door.

foam filled garage door with draught seal

Insulated Roller Door Details (55mm slat)

aluroll compact garage door

Available in 6 standard colours and 3 woodgrain laminate finishes.

The Aluroll compact roller door gets its name from the smaller box-housing used to house the curtain. On doors with an overall height of upto 2400mm, the box is 205mm square; on doors over 2400mm high, the box is 250mm square.

The compact insulated roller door is constructed from 55mm deep foam-filled aluminium slats approximately 8mm thick. Guide width 68mm.

All other details are the same as the classic door.

fitting options for aluroll garage doors

Doors are normally installed on the internal face. Fitting externally or between the reveals or a combination of fits is possible with this highly flexible product.